Why Wpuld the Spund Stop.rhwn Stsrt Again on My.tv

RobotPoweredHome is reader-supported. When y'all buy through links on my weblog, I may earn an affiliate commission. As an Amazon Acquaintance, I earn from qualifying purchases.

I've used the Apple TV for a long fourth dimension now, and while it streams video perfectly, I've faced a few audio issues, where the Apple tree Boob tube audio cuts out every now and then.

As a smart home nerd, I'm on a quest to build the most user-friendly Smart Abode.

To reach this goal, I've been trying to get the nigh out of my Apple TV by getting it to work with HomeKit and using AirPlay to mirror my iPhone onto it.

All this piece of work would be meaningless if there is no audio coming from the device. And so I set to piece of work.

After hours of enquiry on support forums and technical articles, I've put together a comprehensive article on the result.

To gear up your Apple Television set having no audio, ensuring you've selected the right speaker system and make sure Audio Manner is prepare to Motorcar.

If not, become to Menu->Settings-> Audio and Video->Audio Format-> Change Format->New Format, switch information technology to Stereo.

I've besides talked nearly rebooting your hardware and checking for updates.

Apple tree Tv set No Sound: What does this mean?

The Apple TV is a versatile streaming unit that gets updated fairly regularly and has without a doubt gotten much better than it was on release.

That being said, the Apple Tv is non impervious to audio bug, even today.

Every now and then, the audio from the Apple Boob tube gets cut out without caution.

Whatever you do, sometimes the audio just doesn't piece of work at all. Yeah, there may be circumstances where your external speaker system or even your Television audio can exist at error.

This does heavily depend on the external audio arrangement you're using and your TV audio.

Fifty-fifty if it doesn't, nosotros'll guide yous through some troubleshooting procedures to correct the same.

Steps to Ready No Sound Issue on Your Apple TV:

Stride 1: Accept your Apple Tv remote and press Card.
Step two: From the window jack that appears on your screen, curl down to Settings and click on it.
STEP 3: Within the settings card, click the option chosen Audio and Video.
STEP 4: At present, you'll be taken to the Sound and Video settings carte du jour. Here scroll down and select the pick called Sound Format.
STEP five: Click on the only available option, Change Format.
STEP 6: Now, your Apple Tv software will prompt yous with a window where yous should select Modify Format again.
Pace 7: You'll be taken back to the previous window. Here, roll downwards and select the option New Format and switch it to Stereo.
Stride 8: Use your original Television receiver remote and become to your television's Audio/Sound settings.
Step 9: Select the Sound OUT option and set information technology to Optical.
STEP 10: Make certain you select the option Digital Sound Out <PCM> under Optical.

Yet Unable to Fix No Audio Effect on Your Apple Television receiver? Troubleshooting Tips

Other troubleshooting procedures that you tin can try out include rebooting the whole Apple TV streaming system and any audio hardware connected to the Apple Tv set.

Check and tighten all the HDMI wire connections. Besides, ensure that you've selected the correct speakers in the Sound and Video settings choice in the Apple Television receiver menu and make sure the Audio Mode is ready to Automobile (but some Goggle box'southward do require 16 bit).

Moreover, it's ever better to employ the updated application for Apple TV and hence do update your organization if you oasis't washed it yet.

I've provided a detailed account of how each of these troubleshooting procedures tin can exist put to use below:

Rebooting the Apple Tv set system:

I'd recommend you reboot your Apple tree TV system from time to time. Rebooting is an constructive manner to set up some minor technical issues that often might occur in your organization, especially if the video you're airplaying has no sound.

This is because on rebooting your Apple tree TV, the RAM gets cleared, thereby preventing your RAM from getting excessively clogged.

Rebooting likewise ensures that all the programs running in your Apple Television set system come to a halt, thereby giving your organisation a fresh showtime. If you're lucky, only a reboot might fix the issue at stake hither.

For rebooting– In your Apple tree TV remote, concur down the Carte button and the TV button simultaneously for about six seconds.

Ignore the sleep dialog that pops up on doing then. You'll notice that the LED in the Apple TV device starts blinking after the power goes off.

This indicates that the organization is rebooting. If yous could not connect to the device, check out here.

Rebooting the hardware continued to the Apple TV system:

Sometimes, the audio problems are a result of the external sound systems continued to your Apple tree Idiot box.

Information technology might non be your Apple Goggle box at mistake. Hence, we recommend you switch off and disconnect every external audio hardware system connected to the Apple TV, look for at to the lowest degree 30 seconds to ane minute earlier you switch on, and reconnect them back to your Apple TV once more.

Check and tighten all the HDMI cable connections:

Sound issues can oft ascend also due to pocket-size connexion issues. We'd recommend you check and ensure all the HDMI cable connections to say, your homekit soundbar or television audio system are proper and tight.

Ensuring you've assigned the right sound system to your Apple Goggle box system

Yous must make sure that your Apple TV identifies the right speaker organization connected to information technology as its Audio Output.

These are some procedures that are oft disregarded by the users and hence are very important.

Let'south run through the steps to practice this:

Pace i: Printing the Menu push on your Apple Goggle box remote.
Pace 2: From the menu that appears on the screen (click here if your chief carte du jour is blank), scroll down and select Settings.
Pace iii: The Settings carte opens up. Scroll downward to the Audio and Video pick and select it.
Step 4: From the new carte du jour that appears on-screen select Audio Output and assign the right sound system.

Bank check for updates:

Updates make your Apple Television set system software more refined and optimized. Your system gets better and ameliorate with each update, and hence information technology's expert practice to update your system as each update rolls out.

Ofttimes most of the issues faced by the user are addressed by the most recent updates. These are the steps to cheque for an update on your Apple Television set.

Stride ane: Utilise your Apple Boob tube remote and press the Bill of fare button.
Step ii: Become to Settings on the menu window and click on information technology.
Stride 3: Click on Software Updates and select Update Software.
Footstep 4: A dialog appears on your screen if in that location are whatever available updates. Select Download and Install to start the update procedure. Exist patient and practise not disconnect your Apple TV while the update process is going on.

Conclusion

As information technology turns out, the Apple Idiot box'due south audio issues are non a very uncommon error to occur.

Its troubleshooting procedures are also relatively easy and less time-consuming.

I hope that the information provided in this commodity has helped you solve the various audio issues you faced.

If you still detect yourself facing the aforementioned issues over and over once again, I'd recommend y'all get in contact with an authorized service center for the same.

You lot May Likewise Savor Reading:

Best AirPlay 2 Compatible TVs You Can Buy Today
How To Connect Apple tree Television receiver To Wi-Fi Without Remote?
Apple TV Connected To Wi-Fi Just Not Working: How To Fix [2021]
Apple tree Boob tube Flickering: How to Troubleshoot in Seconds
Apple tree TV Stuck On Airplay Screen: How To Set up

Frequently Asked Questions

Does Apple Television receiver have sound out?

Yeah, the Apple Television set near certainly does take an Audio out and can output both v.ane and seven.one surround audio.

How exercise I connect my Apple TV to my sound arrangement?

Connect a two-mode HDMI cablevision to the HDMI port behind your Apple TV unit and to the HDMI port of your surround sound receiver.

Accept a second two-way HDMI cable and connect it to the HDMI out port of your environs audio system( if there are two HDMI out ports, go for the one labeled Chief).

Connect the other end of your second two-way HDMI cable to the available HDMI port input on the back of your television.

Plug in the power cable to your Apple Boob tube, gear up it upwards if you haven't. Switch on the surroundings organization as well, and you're good to go.

How do I reboot Apple TV?

In your Apple TV remote, concur down the Carte push button and the Telly push button simultaneously for about six seconds.

Ignore the sleep dialog that pops up on doing then. You'll notice that the LED in the Apple tree Television receiver device starts blinking subsequently the power goes off.

This indicates that the system is rebooting.

How do I connect Apple tree TV to RCA audio?

To connect an Apple tree Goggle box arrangement to an RCA audio, you lot'll demand an external RCA to HDMI converter hardware.

Connect the RCA audio cablevision to the converter and use the HDMI port cable on the other side of the converter to connect information technology to the Apple TV.

conversewoned1940.blogspot.com

Source: https://robotpoweredhome.com/apple-tv-no-sound/